Rowing & Sports Performance Monitoring Support

Cadence Battery Replacement Instructions

Need Help? 

Our NK Knowledge Center is available 24-7, and has answers to many common questions, along with tips and tricks for using NK products.  

For  email assistance with the installation or operation of your NK product, write techsupport@nkhome.com.

For help with an apparent malfunction, or to arrange or inquire about a repair, write repairs@nkhome.com.

Or call 800.784.4221 (610.447.1555 outside of the USA), Monday to Friday, 9 to 5.

 

Materials needed: Jewelers Screwdriver Size # 00, Precision tweezers, one lithium CR 2032 watch battery

Cadence Battery Replacement

  

Step 1) Remove the four screws from the stainless steel case back of the watch with a Jewelers screwdriver.

Cadence Battery Replacement

Step 2) Remove the stainless steel case back from the watch

Cadence Battery Replacement

  

Step 3) Remove the clear plastic tape from the watch assembly. Once the tape is removed from the watch assembly, discard the tape. (Do not to take the assembly out of the watch)

Cadence Battery Replacement

Step 4) Unlatch the clip covering the CR 2032 battery

Replacing Cadence Battery

  

Step 5) Remove and replace the CR 2032 battery with a new lithium battery

Replacing Cadence Battery

Step 6) Check the clips next to each button to make sure they are still aligned properly

Replacing Cadence Battery

  

Step 7) Place the case back onto the watch (Make sure the writing on the back of the watch is not upside down)

Replacing Cadence Battery

Step 8) Securely tighten the four screws so the case back is flush with the watch

Replacing Cadence Battery