1. Download the new ClearNav software (1.4MB)
2. Unzip the file.
3. The result will be as follows:
4. Plug you ClearNav USB stick into your PC and open it up. The result will be similar to this:
Note: If your stick is not exactly the same and contains several other files that's okay and totally normal.
5. Delete the following:
- ClearNavUpdater.exe
- ClearNavUpdater.NKS
- CN.exe
- CN.NKS
6. Replace the files you deleted from the stick with the four NEW files from above (step 2 & 3).
7. Plug your ClearNav USB stick into your ClearNav and then turn it on.
8. ClearNav Updater will boot. Check the software box, then check the update box.
9. The ClearNav software will load and then the ClearNav will boot up.
10. You should see v2.0.0.9 on the boot screen.
11. Make sure your ClearNav is updated to the latest firmware version. Available Here »