Description |
Price |
| Complete ClearNav System: |
| 0600 |
ClearNav Display - Core System
Core ClearNav system includes everything required for on-panel mounting and operation: ClearNav
display unit, handheld remote control, GPS antenna, Nexus wiring board and hookup wires, panelmounted
USB/Remote extension, on-panel mounting hardware and instructions. |
$2800.00 |
| "First Flight" Early Release Program |
$2,300.00 |
| System Accessories - Add to Core ClearNav System (if desired): |
| 0612 |
Remote Control - Stick Mounted
Add to ClearNav system if stick control is preferred. Precision machined mahogany with durable twopart
epoxy finish. 10-button remote control panel mounted in top of handle for comfortable, ergonomic
control of ClearNav with flying hand. Includes PTT button. Specify stick diameter when ordering. |
$650.00 |
| 0630 |
Mounting Kit - In Panel
Aluminum bezel, standoffs, support bracket and template for mounting ClearNav display flush with panel. |
$65.00 |
| 0632 |
RAM Mount
Double-hinged RAM mount, ClearNav mounting plate, panel reinforcement plates, extension cable and
mounting hardware for mounting ClearNav in front of panel. Requires Part #0645, DB15 Extension
Cable, to connect ClearNav to Nexus Board mounted behind panel. |
$120.00 |
| 0645 |
DB15 Extension Cable
Cable to connect ClearNav on RAM mount to Nexus Board installed behind panel. Cable is custom
multi-conductor 2' cable with low-profile DB9 male/female connectors and extremely flexible and
abrasion resistant jacket. Cable is run through 3/8" (1 cm) hole in panel and connected to color coded
screw-terminal mount on Nexus Board (conductors are pre-stripped and tinned). |
$60.00 |
| 0646 |
Cable - CAI 302 to Nexus Board
DB9/RJ22 CANbus cable to connect a Cambridge 302 to a ClearNav Nexus Board to provide airspeed
data for maximum wind accuracy. |
$30.00 |
| 0647 |
Cable - FLARM to Nexus Board
RJ22 serial cable to connect a FLARM unit to a ClearNav Nexus Board to provide FLARM data for
alarms and location of alerts. |
$10.00 |
| 0649 |
Cable - Front Seat Nexus Board to Second Seat Nexus Board
RJ22 CANbus cable to link two ClearNav systems and permit sharing of airspeed data from a CAI 302. |
$12.00 |
| System Components — Individual Components included in Core ClearNav System: (Purchase to build an "a la carte" system.) |
| 0600-UNIT |
Display - Unit Only
Display unit only, with mounting nuts, template, box and instructions. NO remote, antenna, wiring or
panel extension. Core system (Part # 0600) comprises 0600-UNIT plus ALL of the following
components. |
$2,450.00 |
| "First Flight" Early Release Program |
$1,950.00 |
| 0610 |
Remote Control - Handheld
Handheld 9-button wired remote control with RJ22 connector. Slim, contoured and comfortable for use
in non-flying hand. Recommended for backup and out-of-cockpit use even if installing stick remote. |
$140.00 |
| 0640 |
GPS Antenna
Active external GPS antenna with Dual-Lock mounting strips. Connects directly to ClearNav. |
$50.00 |
| 0641 |
Nexus Wiring Board w/hookup wires
Compact wiring board with CANbus connector and two serial (RJ22) connectors, screw-terminal strip
and power cable. Mount directly to DB15 on rear of ClearNav, or install anywhere behind panel and
connect to ClearNav using extension cable. |
$100.00 |
| 0651 |
CANbus/USB Extension, Panel Mounted
1" (25 mm) round panel insert containing USB and RJ-22 sockets. Provides quick access for USB
memory stick and remote control connection with any panel or installation configuration. |
$60.00 |
| Second Seat Installation: |
| |
The same mounting options and components are used when installing the ClearNav in the second seat in a duo
glider. Two ClearNav systems installed in one glider will operate completely independently as they each contain a GPS and full functionality. If
one ClearNav is connected to a Cambridge 302 for airspeed data, a CANbus extension cable may be used to connect the two Nexus Boards to
enable sharing of the airspeed data. Additional data and function sharing may be available in the future. |
|
